Handling of new generation of BZ-markers is even more practicable
With the new generation of the marking tools „BZ-Marker“, an easy change of the marking pin is possible. Using pliers the marking pin can easily pulled out and changed. With this it is no longer necessary to send the marking tool to the manufacturer to change the marking pin. This saves both, time and money.
The BZ-Marker is a cost-effective marking tool for your CNC machining center to generate a durable marking on many different kinds of materials.
It is possible to seat this marking tool into a collet or a weldon tool holder and integrate it directly into the machine spindle of your CNC machining center. The marking speed is aligned with the speed of your machining center.
Due to the high quality guiding of the tool, uneven and raw surfaces can be marked with for example a serial number without any problems. A stepless adjustment, depending on the material hardness and the requested marking depth, is possible.
Compared with the marking process using a milling tool in the CNC machining center, the marking times can be reduced by 75% when using the BZ-Marker. The marking pin does also have a very long lifetime. With this a fast rationalization of this marking tool is guaranteed.
To generate the required markings, the marking tool will be pressed into the material and drawn through according to the programmed font. The material will be compressed on the position of the marking and will not be weakened or damaged. No noise will occur with this marking method.
Depending on the material and the required marking depth you can choose between the four different tool sizes S, M, L and XL.
Are you interested in the BZ-Markers?
Please send an email to email@example.com or visit us online at www.markator.com. We would be pleased to advise you!